s8848 2017-04-21 13:40:44  

版權

 解決問題： WARNING:iMPACT:923 - Can not find cable, check cable setup !

從https://forums./xlnx/board/crawl_message?board.id=OTHER&message.id=7314的看到的方法。參考

Try to do a quick unistall re-install of the drivers and check if it works.

 (1)    In a command prompt browse to your C:/Xilinx/<ISE_version>/ISE_DS/ISE/bin/nt64 directory on 64-bit installs. i.e. type cd C:/Xilinx/<ISE_version>/ISE_DS/ISE/bin/nt64

(2)    To uninstall the jungo drivers type the command:  wdreg -compat -inf windrvr6.inf uninstall

 (3)    To reinstall the jungo drivers type the command:  wdreg -compat -inf windrvr6.inf install

Thanks,

Anirudh

PS: Please MARK this as an answer in case it helped resolve your query.Give kudos in case the post guided you to a solution.

版權聲明：本文為CSDN博主「s8848」的原創文章，遵循CC 4.0 BY-SA版權協議，轉載請附上原文出處鏈接及本聲明。

原文鏈接：https://blog.csdn.net/s8848/article/details/70313917